Polyester Resins for Epoxy Cure Powder Coatings (50/50)
Keywords:
Shantai Chemical
- 产品描述
-
- Commodity name: Polyester Resins for Epoxy Cure Powder Coatings (50/50)
Type Ratio(Resin/curing agent) Acid value
mgKOH/gViscosity
(Pa.s/175℃)Tg（℃） Curing Condition Performance and Application Descriptions SA5050 50/50 68~75 7.5~9.0 55±1 180℃×15min或/200℃×10min General-purpose 5:5 polyester with good comprehensive performance, suitable for making high-gloss flat powders.
SA5050X 50/50 68~75 5.0~7.0 55±1 190℃×15min或200℃×12min Slow curing with excellent leveling, making it particularly suitable for use with physical matting agents to produce matte powders.
SA5050Y 50/50 68~75 7.5~9.0 55±1 200℃×10min Excellent leveling, good mechanical properties, especially suitable for use with physical matting agents to produce matte powders.
SA005 50/50 68~75 5.0~7.0 55±1 200℃×10min Free of organotin, it has excellent comprehensive performance and is suitable for making matte powders in combination with physical matting agents.
SA5050C 50/50 68~75 7.0~9.0 55±1 190℃×15min或200℃×12min Slow curing with excellent leveling, suitable for making high-end glossy flat powders.
SA5050G 50/50 68~75 7.5~9.0 60±1 180℃×15min或200℃×10min High Tg, excellent storage stability, superior water boiling resistance and mechanical properties, high flow leveling and high gloss, suitable for making high-gloss flat powders.
SA5050H 50/50 68~75 7.5~9.0 55±1 180℃×15min或200℃×10min A general-purpose 5:5 polyester free of organotin compounds with good comprehensive performance.
SA5050HM 50/50 68~75 7.0~9.0(180℃) 58±1 180℃×15min或200℃×10min Free of organotin, it has excellent comprehensive performance, high Tg, and is suitable for making high-gloss flat powders, metal powders, etc.
SA5050L 50/50 68~75 5.5~6.5 52±1 160℃×15min Fast curing or low-temperature curing, with excellent comprehensive performance, high luster, suitable for making high-gloss powders.
SA5050M 50/50 68~75 7.5~9.0 56±1 180℃×15min或200℃×10min It has excellent comprehensive performance, high Tg, good anti-clumping properties, and is suitable for making high-gloss flat powders.
SA5050T 50/50 75~82 8.0~9.5(180℃) 60±1 180℃×15min或200℃×10min High Tg, good mechanical properties, excellent flow leveling, suitable for making heat transfer powder coatings.
SA5050W 50/50 68~75 7.5~9.5 55±1 200℃×8min Fast curing, excellent mechanical properties, suitable for retouch spraying and thick coating, especially suitable for making wrinkled powder and sand-textured powder.
SA5051 50/50 68~75 5.0~7.0 55±1 180℃×15min或200℃×10min Free of TMA, it has excellent mechanical properties, good leveling performance, and overall superior performance, making it suitable for producing high-gloss flat powders.
Previous page
Recommended Products
Product Inquiry
Phone
Address
Xidu High-Tech Industrial Park, Hengyang, Hunan Province, China
Powered by:www.300.cn Changsha SEO